Customer Service:
10AM-10PM CST, Mon - Fri
10AM-6PM CST, Sat

Show Room Hours:
(Please Call For an Appointment)
10AM-10PM CST, Mon - Fri
10AM-5PM CST, Sat - Sun

Call: 1-877-653-8732
_

Manufactures
of Quality Metal Detectors

Call Us: 1-877-653-8732

Welcome My Friends

GoldenRoadDetectors.Com

Sun Ray Logo

QUALITY METAL DETECTING ACCESSORIES

Sun Ray In-line Probes

Sun Ray In-line Target Probes are designed to work with your metal detector, through the headphones you are using, or the existing speaker (if you do not use headphones). Powerful and easy to set up and use, the Sun ray probe uses the same discrimination pattern you have set for you detector and sounds like your detector. No need to disconnect, just flip the easily accessible switch and your probe is on, or off.

The probe you will be shipped is "black" with a red tip.
White probe in photo was for picture quality,

Sun Ray In-line Probe
Sun Ray FX-1 In-line Probe
Product Discontinued
Product Discontinued
Sun Ray IYF-1 n-line Probe
Sun Ray GI-1 In-line Probe

Three models available for the Fisher line of metal detectors,  Sun Ray CS-1 for Coinstrike and ID Edge, Sun Ray FZ-1 For all Fisher CZ models except CZ-6, CZ-20 & CZ-21, and Sun Ray FX-1 for Fisher F70 and F-75 models.

Sun Ray FZ-1 In-line Probe
Sun Ray CS-1 In-line Probe

Sun Ray FZ-1 Probe Mounted
 Mounted on Fisher CZ Model
The probe you will be shipped is "black" with a red tip. White probe in photo was for picture quality,

Sun Ray Detector Electronics is proud to announce our new Invader™ series of aftermarket accessories for Fisher metal detectors! The new Sun Ray Invader Target Probe has been developed to satisfy the pinpointing and retrieval needs of Fisher owners. We have received many requests for an in-line target probe Fisher. Now Fisher owners can enjoy the same benefits our quality Sun Ray in-line probes have offered users of previous models! Here are some of the features:

Fully compatible with the Fisher models listed. The probes are precision built to ensure peak performance.

Accurate "bulls eye" pinpointing on coin size targets up to 3" + deep depending on settings, operation modes, ground and moisture conditions!

New compact, light weight, waterproof/submersible 6" X 1" diameter probe mounts nicely along arm rest for easy access. The probe and cable weigh approx. 5 oz. The switch box, connectors, cable and two probe clips, etc. weigh approx. 5oz. - approx. 10 oz total!

Sun Ray FX-1 Probe
Mounted on Fisher F70/F75 Model
,

Sun Ray CS-1 Probe
Mounted on Fisher CoinStrike/ID Edge Model
The probe you will be shipped is "black" with a red tip. White probe in photo was for picture quality,

Sun Ray YF-1 Probe Mounted onGarrett ACE Model
(Compatable with ACE 150, 250, 350 GTP 1350 GTAX 550, 750 & 1250) The probe you will be shipped is "black" with a red tip. White probe in photo was for picture quality,

Sun Ray GI-1 Probe Mounted on Garrett  GTI Model
(Compatable with  1500, 2000 & 2500 models) 
The probe you will be shipped is "black" with a red tip. White probe in photo was for picture quality,

Two models available  for the Garrett line of metal detectors. 
The GI-1 model is fully compatible with all Garrett GTI models (including the 1500, 2000, 2500)!
The YF-1 is fully compatible with the Garrett ACE 150, 250 & 350 models and with the flip of a switch is compatible with the GTP 1350 and GTAX 550, 750 & 1250. (NOTE: Early GTAX models including the GTAX 350, 400, 500 & 1000 are not compatible due to a different "center pin" connector used.
Sun Ray Detector Electronics is proud to announce our new Invader™ series of aftermarket accessories for Garrett metal detectors! The new Sun Ray Invader Target Probe has been developed to satisfy the pinpointing and retrieval needs of Garrett owners. We have received many requests for an in-line target probe Garrett. Now Garrett owners can enjoy the same benefits our quality Sun Ray in-line probes have offered users of previous models! Here are some of the features:

Fully compatible with the Garrett models listed. The probes are precision built to ensure peak performance.

Accurate "bulls eye" pinpointing on coin size targets up to 3" + deep depending on settings, operation modes, ground and moisture conditions!

New compact, light weight, waterproof/submersible 6" X 1" diameter probe mounts nicely along arm rest for easy access. The probe and cable weigh approx. 5 oz. The switch box, connectors, cable and two probe clips, etc. weigh approx. 5oz. - approx. 10 oz total!

Sun Ray In-Line Probes
For Fisher Models
Golden Road Price: $194.95

Choose Your Detector

Sun Ray GI-1 or YF-1 In-Line Probes
For Garrett Models
Golden Road Price: $194.95

Choose Your Detector
SUN RAY S-1 SUPER TARGET PROBE
SUN RAY S-1 SUPER TARGET PROBE

SUN RAY S-1 SUPER TARGET PROBE
Minelab Sovereign Elite & new Sovereign GT

Accurate "Bulls eye" pinpointing on coin size targets up to 3" deep in all metal mode! 1 1/2" - 2" accurate tone ID in discriminate mode! (NOTE: Greater depth on larger than coin size targets)

Accurate visual ID when used with Sun Ray or Minelab digital meter!

Uses the Elite's BBS circuitry to cancel ground effects and reject most hot rocks!

No buzzers or lights necessary. All target responses come directly through your headphones! Makes hand held probes obsolete!

No extra batteries required!

S-1 probe is 1" X 9" long, comes with a very flexible heavy duty custom 30" straight cable for "tangle free" operation and is submersible.

S-1 switch box slides onto the meter mounting bracket and the meter slides onto the top of the S-1 switch box allowing you to see the Minelab meter display easier and allows switching from coil to probe and back with the flip of your thumb!

Probe is detachable from S-1 switch box for direct insertion to Elite control housing for stand alone detecting/pinpointing!

Includes S-1 Probe Clip Attachment for attaching S-1 probe along side arm rest when not in use!

Ultra Light Weight! The "New" S-1 has a smaller, more compact switch box and weighs 2 1/2 oz less than original S-1. Probe w/cable=7 oz / S-1 switch box=5 oz / overall weight including Probe Clip Attachment=13 oz!

S-1 switch box comes with a short standard length cable and connects directly into your Minelab or Sun Ray meter - Standard Model.

Optional 13" extended cable model available if mounting your Elite or GT control housing under the arm rest w/o a meter. (NOTE: Please state whether you need the standard or Extended model when ordering.)

Optional 50" extended cable model available if hip/chest mounting Elite control housing w/o a meter. . (NOTE: Please state whether you need the standard or Extended model when ordering.)

Complete installation & operation instructions included.

SUN RAY X-1 SUPER TARGET PROBE
 Minelab Explorer, E-Trac, Quattero & Safari

Light weight, waterproof/submersible 9" x 1" diameter probe mounts nicely along the Explorer's battery compartment.

Very compact, ultra light switch box mounted on bottom of upper shaft makes for easy switching from coil to probe. Makes coil changes super fast as coil cable will no longer be inserted into upper shaft!

Partially coiled cable reduces cable sagging while sweeping coil.

X-1 gives operator ALL of the same functions as stock coil including accurate visual and audible target ID in both Smartfind & Digital mode, non-motion pinpoint, etc.

Accurate approximate depth indications from tip of probe to target can be achieved through visual observation of the Explorer's depth gauge (although the scale will be different). Scale is explained in X-1 instructions. Accuracy on coin size targets only.

No external buzzers or lights are needed as all targets are heard clearly through your detector headphones!


Accurate "Bullseye" pinpointing on coin size targets up to 3" deep in discriminate mode - 2 1/2" in pinpoint mode!

Light weight, waterproof/submersible 9" x 1" diameter probe mounts nicely along the Explorer's battery compartment.

SUN RAY X-1 SUPER TARGET PROBE
Minelab Explorer, E-Trac, Quattero & Safari
Golden Road Price: $242.04

Pick Your Swing Hand

Models offered here are all "right hand" swing. They are premounted on new Minelab upper shaft. Left hand swing can be ordered and are subject to availability.

SUN RAY S-1 SUPER TARGET PROBE
Minelab Sovereign Elite & new Sovereign GT
Golden Road Price: $194.95

SUN RAY INVADER™ PZ-1  PROBE
SUN RAY INVADER™ PZ-1  PROBE

SUN RAY INVADER™ PZ-1  PROBE
(Compatible White's Prizm series  Coinmaster & Coinmaster Pro)

Sun Ray Detector Electronics is proud to announce our new Invader™ series of aftermarket accessories for White's metal detectors! The new Sun Ray Invader PZ-1 Target Probe has been developed to satisfy the pinpointing and retrieval needs of Prizm and Coinmaster users. Here are some of the features of the PZ-1:

Fully compatible with all Prizm series and Coinmaster/Coinmaster Pro models.
Accurate "bulls eye" pinpointing on coin size targets up to 3"+ deep depending on target size, target orientation, conductivity, detector used, settings, ground and moisture conditions!
NEW! Lighter weight, waterproof/submersible 6" X 1" diameter probe mounts on top of upper shaft. PZ-1 probe and cable weigh approx. 5 oz. PZ-1 switch box, connectors, cable and probe clip, etc. weigh approx. 5 oz. - approx. 10 oz total!
New red Probe Tip Cover installed to prevent wear and tear on the probe tip. Replacement covers available from your authorized, stocking Sun Ray Dealer.
While the PZ-1 probe is waterproof the switch box is water resistant and must not be submersed.
PZ-1 incorporates all of the same functions as the stock coil including accurate visual and audible target ID (if the detector model provides those functions) along with identical pinpoint functions! (Depth reading will be off due to the probe's small diameter which is normal.)
High quality custom made, durable probe and connector cable used for precision performance. Probe incorporates a very flexible heavy duty custom 32" straight cable with strain relief for "tangle free" operation.
Quality high performance toggle switch used for peak performance! (Minimum 100,000 mechanical life operation-as described in manufacturer's specs)
Toggle switch shuts off coil as it turns probe on and vise versa. Coil and probe are never on at the same time.
PZ-1 switch box is conveniently mounted on detector pole attachment in a neutral position (for both right and left hand users) and to prevent toggle from being accidentally switched or bumped by user or damaged by tree limbs, brush, etc. if switch box is brushed or hit during detecting.
No external buzzers, vibrators or lights are needed as all target responses are heard clearly through your detector headphones!
No extra batteries required as the PZ-1 utilizes the detectors power source.
Complete installation & operation instructions included.

12 MONTH WARRANTY!

SUN RAY INVADER™ XL-1 PROBE
SUN RAY INVADER™ XL-1 PROBE

SUN RAY INVADER™ XL-1 PROBE
(Compatible with White's XLT and other 6.592 khz models)

SUN RAY INVADER™ PZ-1 PROBE
(Compatible with all White's Prizm series, Coinmaster & Coinmaster Pro)
Golden Road Price: $194.95

Sun Ray Detector Electronics is proud to announce our new Invader™ series of aftermarket accessories for White's metal detectors! The new Sun Ray Invader XL-1 Target Probe has been developed to satisfy the pinpointing and retrieval needs of XLT and other users with models operating with 6.592 khz.

SUN RAY INVADER™ XL-1 PROBE
(Compatible with White's XLT and other 6.592 khz models)
Golden Road Price: $194.95

Fully compatible with XLT and models using 6.592 khz including Eagle (series), Spectrums, Pro XL, Quantum XT, 6000 Di Pro, 5900 Di Pro, IDX Pro, Classic ID, Classic I, II & III S/L, etc. ! The XL-1 is precision built to ensure peak performance on those models!
Accurate "bulls eye" pinpointing on coin size targets up to 3"+ deep depending on detector used, settings, ground and moisture conditions!
NEW! Lighter weight, waterproof/submersible 6" X 1" diameter probe mounts on top of upper shaft. XL-1 probe and cable weigh approx. 5 oz. XL-1 switch box, connectors, cable and probe clip, etc. weigh approx. 5 oz. - approx. 10 oz total! (Optional box mount probe clip attachment available for those wishing to mount probe along side of detector control housing - presently available for the slim-line control boxes like the XLT, IDX Pro, etc).
New red Probe Tip Cover installed to prevent wear and tear on the probe tip. Replacement covers available from your authorized, stocking Sun Ray Dealer.
While the XL-1 probe is waterproof the switch box is water resistant and must not be submersed. (We use the same connectors as White's.)
XL-1 incorporates all of the same functions as the stock coil including accurate visual and audible target ID (if the detector model provides those functions) along with identical pinpoint functions! (Depth reading will be off due to the probe's diameter which is normal.)
High quality custom made, durable probe and connector cable used for precision performance. Probe incorporates a very flexible heavy duty custom 30" straight cable with strain relief for "tangle free" operation.
Quality high performance toggle switch used for peak performance! (Minimum 100,000 mechanical life operation-as described in manufacturer's specs)
Toggle switch shuts off coil as it turns probe on and vise versa. Coil and probe are never on at the same time.
XL-1 switch box is conveniently mounted on detector pole attachment in a neutral position (for both right and left hand users) and to prevent toggle from being accidentally switched or bumped by user or damaged by tree limbs, brush, etc. if switch box is brushed or hit during detecting.
No external buzzers, vibrators or lights are needed as all target responses are heard clearly through your detector headphones!
No extra batteries required as the XL-1 utilizes the detectors power source.
Complete installation & operation instructions included.

FULL 12 MONTH WARRANTY!!

We have received many requests for in-line target probes by White's and other detector brand users for several years due to the popularity of our quality in-line probes for the Minelab Explorer and Sovereign/Elite. Now White's owners can enjoy the same benefits a quality Sun Ray in-line probe has to offer! Here are some of the features of the XL-1:

SUN RAY INVADER™ DX-1  PROBE
SUN RAY INVADER™ DX-1  PROBE

SUN RAY INVADER™ DX-1  PROBE
( DFX, DFX 300, MXT, MXT PRO, M-6,V3/V3i)

Sun Ray Detector Electronics is proud to announce our new Invader™ series of aftermarket accessories for White's metal detectors! The new Sun Ray Invader DX-1 Target Probe has been developed to satisfy the pinpointing and retrieval needs of DFX/DFX 300/MXT/MXT PRO/M-6 & SPECTRA V3/V3i users.

Fully compatible with DFX, DFX 300, MXT, MXT PRO & M-6 models! The DX-1 is precision built to ensure peak performance.

(Spectra V3/V3i Compatibility is as follows:

WHITE'S SPECTRA V3/V3i AND SUN RAY INVADER DX-1 TARGET PROBE COMPATIBILITY

The Sun Ray Invader DX-1 has been determined by us and the engineers at White's Electronics in Sweet Home, OR to be compatible with the new Spectra V3 with the following exceptions:

(1) The probes we have tested on the V3 did not overload on RX 15 (gain) with TX Boost on. However, the probe may or may not overload at those settings due to slight tolerances from probe to probe just like slight tolerances from one coil to the next. (See (2) below.

(2) However, the stock White's 10" DD coil may or may not overload with the DX-1 in-line depending on the tolerances from coil to coil. This has nothing to do with the probe or coil involved, rather with the switch (for switching from coil to probe and visa versa)

(3) It was found that by either reducing the RX gain a number or two ,or, disengaging TX Boost resolved the problem.

(4) In most hunting conditions RX gain cannot be used at maximum setting unless you are detecting on neutral ground such as a beach with no mineralization, especially with TX boost engaged.

(5) Other V-3 compatible coils, including non V-tuned coils (whether factory or after-market) may overload at max RX and TX Boost and may require a lower RX setting (or TX Boost disengaged). How low will depend on the coil and ground conditions, however, our tests showed other coils we tested only had to be lowered on RX a few numbers to cancel the overload if TX Boost was left engaged. (NOTE: Various tests described above were conducted by both Sun Ray Detector Electronics and White's Electronics in Sweet Home, OR. White's Electronics has approved the above compatibility statement.)
Accurate "bulls eye" pinpointing on coin size targets up to 3"+ deep depending on detector used, settings, ground and moisture conditions!

NEW! Lighter weight, waterproof/submersible 6" X 1" diameter probe mounts on top of upper shaft. DX-1 probe and cable weigh approx. 5 oz. DX-1 switch box, connectors, cable and probe clip, etc. weigh approx. 5 oz. - approx. 10 oz total! (Optional box mount probe clip attachment available for those wishing to mount probe along side of detector control housing).

New red Probe Tip Cover installed to prevent wear and tear on the probe tip. Replacement covers available from your authorized, stocking Sun Ray Dealer.

While the DX-1 probe is waterproof the switch box is water resistant and must not be submersed. (We use the same connectors as White's.)

DX-1 incorporates all of the same functions as the stock coil including accurate visual and audible target ID along with identical pinpoint functions! (Depth reading will be off due to the probe's diameter which is normal.)

High quality custom made, durable probe and connector cable used for precision performance. Probe incorporates a very flexible heavy duty custom 32" straight cable with strain relief for "tangle free" operation.

Quality high performance toggle switch used for peak performance! (Minimum 100,000 mechanical life operation-as described in manufacturer's specs)

Toggle switch shuts off coil as it turns probe on and vise versa. Coil and probe are never on at the same time.

DX-1 switch box is conveniently mounted on detector pole attachment in a neutral position (for both right and left hand users) and to prevent toggle from being accidentally switched or bumped by user or damaged by tree limbs, brush, etc. if switch box is brushed or hit during detecting.

No external buzzers, vibrators or lights are needed as all target responses are heard clearly through your detector headphones!

No extra batteries required as the DX-1 utilizes the detectors power source.

Complete installation & operation instructions included.

FULL 12 MONTH WARRANTY!!

We have received many requests for in-line target probes by White's and other detector brand users for several years due to the popularity of our quality in-line probes for the Minelab Explorer and Sovereign/Elite. Now White's owners can enjoy the same benefits a quality Sun Ray in-line probe has to offer! Here are some of the features of the DX-1:

SUN RAY INVADER™ DX-1 TARGET PROBE
( DFX, DFX 300, MXT, MXT PRO, M-6,Spectra V3/V3i)
 Golden Road Price: $194.95

SUN RAY PRO GOLD HEADPHONES

Sun Ray Detector Electronics is proud to introduce our new Sun Ray Pro "Gold" Headphones. We decided to offer a high quality set of professional headphones without the highest price! Plus we have now added even more new features making these the premier metal detector headphones on the market today!! The Sun Ray Pro "Gold" version are manufactured according to the following specifications:

Specifications & Features:

- High output 150 ohm (nominal impedance) speaker elements which are certified as hearing aid compatible and are sensitive enough to pick up even the faintest of signals. Aluminum case construction with polymer cones for moisture and sweat protection.

- Dual multi position "segmented or detent" volume controls with NEW BLACK & YELLOW KNOBS for that "Sun Ray" look!

- "New" Enhanced Limiter Circuit with on/off switch (left side). (For more pronounced reduction in loud blasts from surface targets, while allowing the faintest of signal responses to be clearly heard. Limiter results will vary from one detector model to another.)

- Mode selector switch (right side) makes the new Sun Ray Pros compatible with most metal detectors.

- NEW TOGGLE SWITCH BOOTS keep moisture and dirt out of toggle switches!

- "New" comfortable, lightweight dual swivel point ear cups with all "new" soft leather muffs.
The new foam padded soft leather muffs are not only more comfortable than the earlier vinyl muffs, they do not develop a "memory". They conform to the shape of your head around your ears when worn and when taken off return to their original shape! Vinyl which normally has a life expectancy of (3) three years can get harder with time and the elements, which can cause a less comfortable fit as well as a noticeable increase in ambient (outside) noise. The former version of the Sun Ray Pros yield a 24 decibel reduction in ambient noise blocking ability when new. The new Sun Ray Pro "Gold" version yields a 26 decibel reduction in ambient noise blocking ability and continues to block that noise day in and day out, year in and year out because they stay soft and comfortable!

- "New" adjustable soft leather headband.

- NEW!! Custom engineered coil cable for more dependability and longer life! Here are some of the new features of the new   cable:
- New polyurethane jacket for better memory retention of coils vs. the previous PVC cable!
- More than 3X the number of copper strands (than previous cable) for more resistance to breakage!
- New cable coil is 20" retracted vs 13" on previous cable.
- Overall length of new cable is 32". Extended length approx. 18" longer than previous cable!
- New "multidirectional" strain relief flex vs 2 directional on previous cable!
- New cable jacket inserts fully into 1/4" molded, right angle plug vs previous cable.
- EXTERNAL STRAIN RELIEF and 1/4" right angle, molded GOLD PLATED PLUG!

- Same Limited Lifetime Warranty

SUN RAY PRO GOLD HEADPHONES
Golden Road Price:  $129.95

SUN RAY PRO GOLD HEADPHONES



Product Discontinued
aaaaaaaaaaaaiii